Circuit Breaker Primary Injection Excel Sheet

[changeabilities]

Hi guys,
I hope you all okay. I just wanted to ask do you have any excel sheet to use in Primary Injection test to see the Long time, short time values? If you have i would be glad if you share.
Stay safe.

[SecondGen]

Hi guys,
I hope you all okay. I just wanted to ask do you have any excel sheet to use in Primary Injection test to see the Long time, short time values? If you have i would be glad if you share.
Stay safe.

These values will be dependent on the specific type of trip unit you are testing but as a general reference I would recommend downloading the Utility Relay AC Pro Instruction Book for generic equations. I've included screenshots of the LT and ST formula along with a link to the original manual below, check out page 20.

459

http://www.utilityrelay.com/PDFs/Product_Manuals/AC-PRO_Instruction_Manual.pdf

[changeabilities]

These values will be dependent on the specific type of trip unit you are testing but as a general reference I would recommend downloading the Utility Relay AC Pro Instruction Book for generic equations. I've included screenshots of the LT and ST formula along with a link to the original manual below, check out page 20.

459

http://www.utilityrelay.com/PDFs/Product_Manuals/AC-PRO_Instruction_Manual.pdf

Thank you so much for your response.

[SecondGen]

Thank you so much for your response.

No problem, I'd also recommend checking out the table on page 18 it will give you some expected trip times for the LT function along with allowable tolerance for various bands and test currents. Again, this may be different depending on the specific trip unit but it gives you a general idea.

460