What's wrong with this picture?

**SecondGen** · Posted October 10, 2017

Hint: "I need you to take an oil sample."

**ElectricalTestTech** · Posted October 10, 2017

If I rotate the picture 180 degrees, I could take a sample. 😂

**Machine Gun Kelly** · Posted October 15, 2017

Needs a sample valve in the bottom plug. Not a pipe plug.

**Achandler** · Posted October 18, 2017

Originally Posted by SecondGen

Hint: "I need you to take an oil sample."

Whoops!

**luhanson1** · Posted October 24, 2017

Originally Posted by SecondGen

Hint: "I need you to take an oil sample."

I came across the same thing on some transformers that were built for a local utility out here in California.

**ksviveksiddarth** · Posted October 29, 2017

Originally Posted by SecondGen

Hint: "I need you to take an oil sample."

You have to open the highlighted (yellow) bolted dummy cover for the drain valve

**ElectricalTestTech** · Posted October 29, 2017

Originally Posted by ksviveksiddarth

You have to open the highlighted (yellow) bolted dummy cover for the drain valve

Are you trying to get an air sample or an oil sample ksvivik?

**ksviveksiddarth** · Posted October 31, 2017

Originally Posted by ElectricalTestTech

Are you trying to get an air sample or an oil sample ksvivik?

I thought your trafo could be a one similar to this ...

vivek..

**Chipperk** · Posted June 26, 2018

Originally Posted by SecondGen

Hint: "I need you to take an oil sample."

Yup! Total crap! Pull a vacuum and put a valve in that bottom plug!

**chils15** · Posted June 27, 2018

But they put the valve in facing down so no problem then